Looking for class 4 laser safety eyewear and a barrier. The laser operates at 1070nm.
Always consult your on-site Laser Safety Officer (LSO) for specific guidance. Required optical density (OD) and laser safety personal protective equipment (PPE) are determined based on worst-case scenarios and require professional judgment. All laser safety equipment provided is intended for diffused beam viewing only.To do a minimum optical density calculation we will need to know a few more parameters about the laser (or the required optical density provided by the laser manufacturer). Two common options are the following:
1) Our 125 filter that provides an OD 5+ at 1070nm marked as an OD 5+ @ 855-1085nm
2) Our 205 filter that provides an OD 7+ at 1070nm marked with an OD 7+ @ 1000-1600nm - this is the stronger protection
1) Our 125 filter that provides an OD 5+ at 1070nm marked as an OD 5+ @ 855-1085nm
2) Our 205 filter that provides an OD 7+ at 1070nm marked with an OD 7+ @ 1000-1600nm - this is the stronger protection
As for barriers the wavelength is not important but instead the power of the laser. We off barriers with 200W/cm^2 for 100 seconds and 300W/cm^2 for 100 seconds. For our laser safety barriers page, please see here.
If you'd like to discuss more in detail, always feel free to reach out directly via phone at 952-405-6947 or by email at info@lasersafetyindustries.com
Related Articles
What class is a CO2 laser?
Always consult your on-site Laser Safety Officer (LSO) for specific guidance. Required optical density (OD) and laser safety personal protective equipment (PPE) are determined based on worst-case scenarios and require professional judgment. All laser ...Keyence laser marker MD-X2000 with a Laser Diode with wavelength of 683nm, 5.0 mW output. Can you please recommend a suitable viewing window for this laser?
Always consult your on-site Laser Safety Officer (LSO) for specific guidance. Required optical density (OD) and laser safety personal protective equipment (PPE) are determined based on worst-case scenarios and require professional judgment. All laser ...I purchased a 40 watt Chinese "K40" laser cutter - the wavelength is 10,600nm - I'm looking for safety glasses (fit-over).
Always consult your on-site Laser Safety Officer (LSO) for specific guidance. Required optical density (OD) and laser safety personal protective equipment (PPE) are determined based on worst-case scenarios and require professional judgment. All laser ...I have laser class 4 . 455+-5 nm. 10000mw.
Always consult your on-site Laser Safety Officer (LSO) for specific guidance. Required optical density (OD) and laser safety personal protective equipment (PPE) are determined based on worst-case scenarios and require professional judgment. All laser ...Eyewear for a 1064nm-1083nm with a minimum OD of 5+ over that range. What eyewear do you recommend?
Always consult your on-site Laser Safety Officer (LSO) for specific guidance. Required optical density (OD) and laser safety personal protective equipment (PPE) are determined based on worst-case scenarios and require professional judgment. All laser ...