What laser safety window should I buy for my Orion Motor Tech 40W Co2 Laser Engraver Cutter?

Always consult your on-site Laser Safety Officer (LSO) for specific guidance. Required optical density (OD) and laser safety personal protective equipment (PPE) are determined based on worst-case scenarios and require professional judgment. All laser safety equipment provided is intended for diffused beam viewing only.

It is always best to look for the required optical density at the stated wavelength the manufacturer provides. For lasers that operate between 10,000nm and 11,000nm we can provide an optical density of 6+ (OD6+ @ 10,000-11,000) with our 400 window (please see here or below). For an economical option of Co2 Eye wear with an OD 6+ over the 10,000nm-11,000nm, please see our 100-xx-101 filter.

Please feel free to each out to us via phone or shoot us a note for a formal quote at info@lasersafetyindustries.com

Please see our 400 window here: https://lasersafetyindustries.com/col...
Please see our guide on reading optical density notation below: https://lasersafetyindustries.com/blo...
Please see our laser safety window buyer's guide here: https://lasersafetyindustries.com/blo...

• Related Articles

• I purchased a 40 watt Chinese "K40" laser cutter - the wavelength is 10,600nm - I'm looking for safety glasses (fit-over).

  Always consult your on-site Laser Safety Officer (LSO) for specific guidance. Required optical density (OD) and laser safety personal protective equipment (PPE) are determined based on worst-case scenarios and require professional judgment. All laser ...

• Keyence laser marker MD-X2000 with a Laser Diode with wavelength of 683nm, 5.0 mW output. Can you please recommend a suitable viewing window for this laser?

  Always consult your on-site Laser Safety Officer (LSO) for specific guidance. Required optical density (OD) and laser safety personal protective equipment (PPE) are determined based on worst-case scenarios and require professional judgment. All laser ...

• What class is a CO2 laser?

  Always consult your on-site Laser Safety Officer (LSO) for specific guidance. Required optical density (OD) and laser safety personal protective equipment (PPE) are determined based on worst-case scenarios and require professional judgment. All laser ...

• I have a laser engraver/cutter on order. It is 1.6W, class 4, with a wavelength of 450nm. I'm looking to create an enclosure with a single 12" x 24" piece of acrylic. Which product do you recommend? Also, can the product be shipped to Canada?

  Always consult your on-site Laser Safety Officer (LSO) for specific guidance. Required optical density (OD) and laser safety personal protective equipment (PPE) are determined based on worst-case scenarios and require professional judgment. All laser ...

• Eyewear for a 1064nm-1083nm with a minimum OD of 5+ over that range. What eyewear do you recommend?

  Always consult your on-site Laser Safety Officer (LSO) for specific guidance. Required optical density (OD) and laser safety personal protective equipment (PPE) are determined based on worst-case scenarios and require professional judgment. All laser ...